Build a Driveway That Handles Rain and Traffic

Gravel Driveway Installation in Arnaudville

Gravel driveways in Arnaudville often develop ruts, washouts, and standing water after heavy rainfall if the base is not prepared correctly. Vehicles sink into soft spots, and gravel spreads unevenly across the surface. A properly built driveway includes layers of compacted material that support vehicle weight and allow water to drain through instead of pooling on top.

Campbell Earthworks Services installs and rebuilds gravel driveways for residential and rural properties throughout Arnaudville. The work includes excavating the driveway path, building a compacted base layer, adding drainage where needed, and topping the surface with gravel suited to the soil and traffic level. Existing driveways can be reworked to correct drainage problems or improve access. The finished driveway is firm, drains well, and requires minimal maintenance over time.

Contact us to request a driveway quote and review your options in Arnaudville.

How a Gravel Driveway Is Built to Last

Driveway installation in Arnaudville starts with excavating the path to remove topsoil and soft material that would compress under vehicle weight. A base layer of crushed limestone or similar aggregate is spread and compacted using heavy equipment. Crown or slope is built into the surface to direct water off the edges, and gravel is added as the final layer.

After the work is complete, you will notice a firm surface that supports vehicles without sagging or rutting. Water runs off the sides instead of sitting in the center or forming puddles. The driveway remains accessible during wet weather and holds up under regular use. Proper base preparation prevents washouts and standing water even during Louisiana's heavy rain events.

Driveways are commonly installed on parish roads, farm properties, and private drive lanes where pavement is not practical or necessary. The service does not include paving or asphalt work, but it creates a durable alternative that matches rural and residential needs.

Property owners in Arnaudville often ask about materials, drainage, and how long a gravel driveway lasts before they move forward with installation or repair.

Answering the Questions Homeowners Ask Most

What type of gravel is used for driveways?
Driveways are topped with crushed limestone or similar angular gravel that locks together under weight and does not wash away easily. The base layer uses larger aggregate for stability and drainage.
How deep should a gravel driveway be?
Most driveways in Arnaudville are built with a four to six inch compacted base and a two to three inch gravel surface. Depth depends on soil conditions, traffic level, and whether the driveway is used by heavy vehicles or equipment.
Why does the driveway need to be crowned?
Crowning the surface means the center is slightly higher than the edges so water drains off both sides instead of pooling in the middle. This prevents ruts and soft spots from forming after rain.
What happens to an existing driveway that washes out?
Existing driveways can be reworked by adding base material, regrading the surface, and improving drainage along the edges. Washouts are usually caused by missing base layers or poor water management.
How long does a gravel driveway last?
A properly built gravel driveway lasts many years with minimal upkeep. Periodic regrading or gravel topping may be needed depending on traffic and weather, but the base remains stable if it was compacted correctly from the start.

Campbell Earthworks Services installs gravel driveways across Arnaudville that are built to handle heavy rainfall and regular vehicle traffic without washing out or developing soft spots. Get in touch to request a quote and schedule your driveway work.